Effect of nitrogen root zone fertilization on rice yield,uptake and utilization of macronutrient in lower reaches of Yangtze River,China

Improper application of nitrogen (N) has led to high N losses and low N use efficiency in the lower reaches of Yangtze River in China. An effective method to solve such problems is the deep fertilized N in root zone (RZF). Limited information is available on the effect of RZF on the uptake of macronutrients (N, P and K) and rice yield. Field experiments, conducted from 2014 to 2015, compared the farmer fertilizer practice (FFP, with 225 kg ha^?1 of N, split into three doses) and RZF using the same rate but placing N 5 cm away from rice roots in holes 10 cm deep (RZF10) or 5 cm deep (RZF5) as a single application. The highest mean yield (10.0 t ha^?1) was obtained in RZF10, which was 19.5% more than that in FFP. Root zone fertilization of urea (whether 10 cm deep or 5 cm deep) resulted in greater accumulation of N, P and K in stem, leaf sheaths, leaf blades and grains compared to that in FFP in sandy and in loam soils. The uptake of N, P and K was the highest in RZF10 (average at 176.7, 66.2 and 179.1 kg ha^?1, respectively), higher than that in FFP by 45.0, 17.0 and 22.6%, respectively. N apparent recovery efficiency was markedly higher in RZF10 (53.1%) than in FFP (27.5%). RZF10 significantly increased the N, P, K uptake compared with FFP under different N rates in both sandy and loam soils. These results suggest that the N, P and K input amount should be re-determined under RZF.     

Large-scale deployment of a rice 6 K SNP array for genetics and breeding applications

Background

Fixed arrays of single nucleotide polymorphism (SNP) markers have advantages over reduced representation sequencing in their ease of data analysis, consistently higher call rates, and rapid turnaround times. A 6 K SNP array represents a cost-benefit “sweet spot” for routine genetics and breeding applications in rice. Selection of informative SNPs across species and subpopulations during chip design is essential to obtain useful polymorphism rates for target germplasm groups. This paper summarizes results from large-scale deployment of an Illumina 6 K SNP array for rice.

Results

Design of the Illumina Infinium 6 K SNP chip for rice, referred to as the Cornell_6K_Array_Infinium_Rice (C6AIR), includes 4429 SNPs from re-sequencing data and 1571 SNP markers from previous BeadXpress 384-SNP sets, selected based on polymorphism rate and allele frequency within and between target germplasm groups. Of the 6000 attempted bead types, 5274 passed Illumina’s production quality control. The C6AIR was widely deployed at the International Rice Research Institute (IRRI) for genetic diversity analysis, QTL mapping, and tracking introgressions and was intensively used at Cornell University for QTL analysis and developing libraries of interspecific chromosome segment substitution lines (CSSLs) between O. sativa and diverse accessions of O. rufipogon or O. meridionalis. Collectively, the array was used to genotype over 40,000 rice samples. A set of 4606 SNP markers was used to provide high quality data for O. sativa germplasm, while a slightly expanded set of 4940 SNPs was used for O. sativa X O. rufipogon populations. Biparental polymorphism rates were generally between 1900 and 2500 well-distributed SNP markers for indica x japonica or interspecific populations and between 1300 and 1500 markers for crosses within indica, while polymorphism rates were lower for pairwise crosses within U.S. tropical japonica germplasm. Recently, a second-generation array containing ~7000 SNP markers, referred to as the C7AIR, was designed by removing poor-performing SNPs from the C6AIR and adding markers selected to increase the utility of the array for elite tropical japonica material.

Conclusions

The C6AIR has been successfully used to generate rapid and high-quality genotype data for diverse genetics and breeding applications in rice, and provides the basis for an optimized design in the C7AIR.

     

Conservation of small hairtail <Emphasis Type="Italic">Trichiurus japonicas</Emphasis> by using hooks with large artificial bait: effect on the trolling line fishery

Overfishing has reduced the stock of hairtail Trichiurus japonicus around the Bungo Channel, Japan. To determine whether using larger bait in the trolling line fishery could avoid catching small/undersize hairtail, we developed and trialled a new large artificial bait (a soft plastic bait, 6 inches long). A traditional lure with natural bait (type-1), a new lure of the new artificial bait hook without natural bait (type-2), and a new lure with natural bait (type-3) were tested in fishing operations around the Bungo Channel. Compared with type-1, type-2 and type-3 caught fewer undersized and immature female individuals. The number of fish caught, yield, and composition of commercial size grades per recruitment were calculated from field data for each lure and compared. The catch sizes (number of fish per recruitment) were smaller for type-2 and type-3 than for type-1, but yield per recruitment was higher for type-3 than for type-1. Compared with type-1, type-2 and type-3 caught more large individuals, which are more valuable. The newly developed artificial bait conserves hairtail stocks by targeting larger fish, which is economically beneficial for the hairtail trolling line fishery.     

Predicting adoption of double cropping in paddy fields of northern Iran: a comparison of statistical methods

Factors affecting the adoption of double cropping were explored in rice farms of Fouman County of Guilan Province in northern Iran using artificial neural networks (ANNs), linear discriminant analysis (LDA), and logistic regression (LGR). Eleven factors (age, education, occupation, family size, type of farm ownership, distance to the agricultural service center, attending agricultural extension courses, use of financial resources and bank loans, number of domestic animals, area under cultivation, and social participation) were examined. An additional objective was to compare the ability of the three models in predicting the adoption of double cropping. ANNs showed an overall predictive power of 89.8%. LDA showed an overall predictive power of 83.2%, with seven of the eleven independent variables being effective on the adoption of double cropping. LGR indicated an overall predictive power of 87.6%, with eight of the eleven independent variables being effective on the adoption of double-rice cropping. ANNs showed higher power than LGR and LDA in predicting the adoption of double cropping. Based on all three methods used for analysis, the most important independent variables were social participation and area under cultivation (positive factors) as well as distance to the agricultural service center and family members (negative factors). Establishment of cooperatives or other kinds of farmers’ associations to foster social participation could motivate adoption of double cropping, particularly among small-scale farmers. To increase agricultural services, more local centers should be created in rural areas. The government should promote double cropping through effective incentives and technology transfer to small-scale farmers.     

<Emphasis Type="Italic">OsLAP6/OsPKS1</Emphasis>, an orthologue of <Emphasis Type="Italic">Arabidopsis PKSA/LAP6</Emphasis>, is critical for proper pollen exine formation

Background

Male fertility is crucial for rice yield, and the improvement of rice yield requires hybrid production that depends on male sterile lines. Although recent studies have revealed several important genes in male reproductive development, our understanding of the mechanisms of rice pollen development remains unclear.

Results

We identified a rice mutant oslap6 with complete male sterile phenotype caused by defects in pollen exine formation. By using the MutMap method, we found that a single nucleotide polymorphism (SNP) variation located in the second exon of OsLAP6/OsPKS1 was responsible for the mutant phenotype. OsLAP6/OsPKS1 is an orthologous gene of Arabidopsis PKSA/LAP6, which functions in sporopollenin metabolism. Several other loss-of-function mutants of OsLAP6/OsPKS1 generated by the CRISPR/Cas9 genomic editing tool also exhibited the same phenotype of male sterility. Our cellular analysis suggested that OsLAP6/OsPKS1 might regulate pollen exine formation by affecting bacula elongation. Expression examination indicated that OsLAP6/OsPKS1 is specifically expressed in tapetum, and its product is localized to the endoplasmic reticulum (ER). Protein sequence analysis indicated that OsLAP6/OsPKS1 is conserved in land plants.

Conclusions

OsLAP6/OsPKS1 is a critical molecular switch for rice male fertility by participating in a conserved sporopollenin precursor biosynthetic pathway in land plants. Manipulation of OsLAP6/OsPKS1 has potential for application in hybrid rice breeding.

     

Protective Effect of <Emphasis Type="Italic">Juglans regia</Emphasis> L. Walnut Extract Against Oxidative DNA Damage

Walnuts (Juglans regia L.) are relevant components of the Mediterranean diet providing important macronutrients, micronutrients and other bioactive constituents including unsaturated fatty acids, proteins, fiber, vitamins, minerals, phytosterols and polyphenols. Although the walnut beneficial effects in human health are widely recognized by a lot of epidemiologic studies very little is known regarding its effect on damaged DNA. The aim of the present study was to investigate the effect of Juglans regia L. ethanolic extract from kernel on the induction of DNA strand breaks by thiol/Fe³⁺/O₂ mixed function oxidase, tert-butyl hydroperoxide or UVC radiations in acellular and cellular models. Plasmid DNA cleavage and fast Halo assay were used to monitor oxidative damage to DNA. Both approaches showed protection of oxidatively injured DNA. These results agree with a lot of scientific proofs which recommend walnut as dietary adjunct in health promotion and prevention as well as in treatment of lifestyle-related oxidative diseases.     

LED-UV grafting of vinylsulfone dyes onto photo-oxidized wool fabrics

Photografting coloration of wool was carried out under UV-LED irradiation at room temperature using aqueous vinylsulfone dye solution containing vinylsulfonic acid as a comonomer. UV-LED irradiation of the 395 nm emission is more energy efficient, less damaging to the dyes, and much safer to human eyes compared with polychromatic mercury UV lamps. However, in case of the UV-LED lamps, the wool needs to be photo-oxidized either by UV/ozone or polychromatic UV irradiation before the dye photografting. The surface treatments increased the sulfur and oxygen contents in the modified wool surfaces. While the optimally photografted wool fabrics under the UV-LED lamp yielded a K/S value of 9.9, the K/S of the grafted wool increased to 25.2 and 13.6 after the UV/Ozone or polychromatic UV preoxidation at UV energies of 10.6 J/cm² and 25 J/cm² respectively. The color fastness properties of the photografted fabrics were far better than with those of the conventionally reactive-dyed fabrics, implying that the high-molecular-weight photografted dyes seemed to be more durable than the low-molecular dyes.     

Conductive 3D structure nanofibrous scaffolds for spinal cord regeneration

The complex nature of spinal cord injuries has provided much inspiration for the design of novel biomaterials and scaffolds which are capable of stimulating neural tissue repair strategies. Recently, conductive polymers have gained much attention for improving the nerve regeneration. In our previous study, a three-dimensional (3D) structure with reliable performance was achieved for electrospun scaffolds. The main purpose in the current study is formation of electrical excitable 3D scaffolds by appending polyaniline (PANI) to biocompatible polymers. In this paper, an attempt was made to develop conductive nanofibrous scaffolds, which can simultaneously present both electrical and topographical cues to cells. By using a proper 3D structure, two kinds of conductive scaffolds are compared with a non-conductive scaffold. The 3D nanofibrous core-sheath scaffolds, which are conductive, were prepared with nanorough sheath and aligned core. Two different sheath polymers, including poly(lactic-co-glycolic acid) PLGA and PLGA/PANI, with identical PCL/PANI cores were fabricated. Nanofibers of PCL and PLGA blends with PANI have fiber diameters of 234±60.8 nm and 770±166.6 nm, and conductivity of 3.17×10^-5 S/cm and 4.29×10^-5 S/cm, respectively. The cell proliferation evaluation of nerve cells on these two conductive scaffolds and previous non-conductive scaffolds (PLGA) indicate that the first conductive scaffold (PCL/ PANI-PLGA) could be more effective for nerve tissue regeneration. Locomotor scores of grafted animals by developed scaffolds showed significant performance of non-conductive 3D scaffolds. Moreover, the animal studies indicated the ability of two new types of conductive scaffolds as spinal cord regeneration candidates.     

Advances in Variable Rate Technology Application in Potato in The Netherlands

Precision agriculture is a farming management concept based on observing, measuring and responding to inter- and intra-field variability in crops. In this paper, we focus on responding to intra-field variability in potato crops and analyse variable rate applications (VRAs). We made an overview of potential VRAs in potato crop management in The Netherlands. We identified 13 potential VRAs in potato, ranging from soil tillage to planting to crop care to selective harvest. We ranked them on availability of ‘proof of concept’ and on-farm test results. For five VRAs, we found test results allowing to make a cost-benefit assessment. These five VRAs were as follows: planting, soil herbicide weed control, N side dress, late blight control and haulm killing. They use one of two types of spatial data: soil maps or biomass index maps. Data on costs and savings of the VRAs showed that the investments in VRAs will pay off under practical conditions in The Netherlands. Savings on pesticide use and N-fertilizer use with the VRAs were on average about 25%, which benefits the environment too. We foresee a slow but gradual adoption of VRAs in potato production. More VRAs will become available given ongoing R&D. The perspectives of VRAs in potatoes are discussed.